So if Prep Sol has acetone in it, you don't want it near a nitro finished guitar. It's made for dewaxing polyurethane car finishes. Denatured alcohol will remove Sharpie marker, but it also does a job on nitro unless you dilute it at least fifty fifty with water. Then it doesn't work so well on the marker ink. To clean a satin finish acoustic guitar, you will need a lint-free cloth and a cleaning solution. First, lightly dampen the cloth with the cleaning solution. Next, wipe the cloth over the guitar’s surface in a circular motion. Be sure to avoid getting the cleaning solution on the guitar’s strings. Completely remove all the old guitar finish; Upon removing all the hardware and the strings, the next thing to do is remove the old finish by sanding. But, if you don’t want to remove the old finish, simply rough it up and refinish the guitar. If you’re unable to decide, here’s what you need to do: Follow the steps below to learn how to refinish an electric guitar body. 1. Remove the old finish. You can do this by sanding the body with sandpaper or using a paint stripper. 2. Sand the body. This will help to create a smooth surface for the new finish. 3. Apply a new finish. Yes, the dents can be fixed, but it's much trickier than it sounds to get a professional results. To start with, if the wood is actually dented you must steam out the dents. Then the finish is "drop filled" this where you take some nitrocellulose lacquer and fill the dents. You will have to do this several times over a week or so due to shrink Hey guys! I’m Brad, and I make how-to videos. I do custom painting projects, guitar painting, airbrushing, spray can painting, wood working, and a variety of Sand the guitar neck with 600 grit sandpaper to smooth the surface. Apply clear sealer on the neck using a towel. Wait till dry. Apply another coat of the sealer up to 5 coats. Rub with 0000 steel wool to smooth the surface. Transparent sealer is perfect if you like the looks of unfinished guitar. Quick answer: To remove stickers from a guitar in less than 2 minutes, use a hairdryer to soften the adhesive by directing the heat towards the sticker for about a minute. Next, gently peel off the sticker from one corner, ensuring it comes off cleanly. b69aWq.

how to remove finish from guitar